Outside Dimensions (EMO-25 Apparatus only): 1.45” wide x 3.5” deep x 12” tall
Outside Dimensions (with EMO-25 Cartridge loaded): 1.45” wide x 3.5” deep x 14” tall
Max Cartridge Dimensions: 11” long x 0.865” diameter
Cartridge Volume: 25 cubic centimeters (cc)
Movement System: Linear Slide Rail, Plunger, and Stepping Motor
Nozzle Sizes: 0.5mm, 0.75mm, 1mm, 1.5mm, 2mm – Nozzles can be switched out easily.
Drive Electronics: HYREL Head Interface Board, Automatically connects to printer via CANBUS
See it in Action:
EMO-25 can print with the following Materials:
All Extruders and Heads can be installed on and swapped to any HYREL 3D Printer Platform
Because of the overwhelming amount of demand we are currently experiencing, we are taking order deposits to lock-in production slots.
We want to ensure your satisfaction, so please contact us and let us know if you have any questions, suggestions, comments, and/or feedback, at any time!
Order HYREL Extruders
Please fill out the form below and we will send you an invoice through Paypal, all credit card invoicing goes through PayPal, we also accept checks, but the checks must clear the bank before we begin production. All checks will need to be made out to “HYREL LLC” and the mailing address will be emailed to you.