Standard Hot Flow
For the most common 1.75mm filaments on the market with service temperatures up to 250°C.
ABS, Nylons, PLA, PETT, etc.
Compatible with Sugru (Rubber), Clay, Porcelain,
Plasticine, Silicone RTV, PMC, and many more!
Very Hot Flow
For Exotic 1.75mm filaments with service temperatures between 250-450°C. Polycarbonate, PEEK, Ultem, Carbon Fiber
For emulsions, gels, pastes, liquids, waxes and glues – or using your own custom formulations – at up to 75°C.
Flexible Hot Flow
For Flexible 1.75mm filaments with service temperatures up to 250°C.
BendLay, FilaFlex, Flex45, NinjaFlex, etc.
Very Warm Flow
For emulsions, gels, pastes, liquids, waxes and glues – or using your own custom formulations – at up to 150°C.
Engrave, Cut, Trace
Add a 6 watt laser at 450 nanometers.
Cardboard, Foam, Paper, Acrylic, Metals (Engraving Only), PCB (Traces only)
Specialty / Other
Engrave, Cut, Route
For simple operations only possible with a spindle tool. NOTE: you must supply your own fixturing. Paper, Wood, Metals (Drilling only), PCB (Routing), Acrylic
Dynamic Mixing Head
For actively spinning blending of two (potentially more) materials.
Inquire for details