Difference between revisions of "Emulsifiables"

From Hyrel3D
Jump to: navigation, search
m (Davo moved page EMO-Type Head Settings to EMO-Type Heads without leaving a redirect)
Line 30: Line 30:
 
! UV Crosslinking
 
! UV Crosslinking
 
| no || yes || no || yes || no || yes
 
| no || yes || no || yes || no || yes
 +
|}
 +
 +
Settings for these heads (based on planetary gear ratios) are as follows; you will need to adjust these for the qualities of your print media:
 +
 +
{| border="1" class="wikitable" style="text-align: center"
 +
|+ EMO-Type Head Settings
 +
! rowspan=2 | Gear <br/>Reduction
 +
! colspan=2 | Overrides
 +
! colspan=2 | Prime
 +
! colspan=2 | Unprime
 +
|-
 +
! Pulses
 +
! FR%
 +
! Steps
 +
! Dwell
 +
! Steps
 +
! Dwell
 +
|-
 +
! 19:1
 +
| 1.600|| 1.000 || 500 || 100 || 400 || 100
 +
|-
 +
! 27:1
 +
| 2.300|| 1.000 || 700 || 100 || 550 || 100
 +
|-
 +
! 51:1
 +
| 4.700|| 1.000 || 900|| 110 || 750 || 105
 +
|-
 +
! 100:1
 +
| 8.750|| 1.000 || 2000|| 120 || 1600|| 110
 
|}
 
|}

Revision as of 19:56, 13 November 2015

EMO-Type heads are for printing as follows:

  • With pastes, gels, emulsifiables or waxes.
  • At room or elevated temperatures.
  • With or without UV Crosslining.
  • With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.

These include the following:

EMO-Type Head Comparison
Model EMO-25 COD-25 VOL-25 VCD-25 KRA-15 KCD-15
Max Temp Ambient Ambient 100°C 100°C 150°C 150°C
UV Crosslinking no yes no yes no yes

Settings for these heads (based on planetary gear ratios) are as follows; you will need to adjust these for the qualities of your print media:

EMO-Type Head Settings
Gear
Reduction 		Overrides Prime Unprime
Pulses FR% Steps Dwell Steps Dwell
19:1 1.600 1.000 500 100 400 100
27:1 2.300 1.000 700 100 550 100
51:1 4.700 1.000 900 110 750 105
100:1 8.750 1.000 2000 120 1600 110
Retrieved from "https://hyrel3d.com/wiki/index.php?title=Emulsifiables&oldid=258"