Difference between revisions of "Firmware"

Revision as of 18:54, 22 May 2018

Firmware

Versions 2.415 and 33/35, * with Spindle Tool firmware, as of 10 May 2017

For the STM-103 Boards.

Video instructions for flashing the 103 (HH/HB) Controllers: https://youtu.be/yM8QMZBTb4o

Firmware Listing
Filament Heads	Firmware
MK1-250	_FIL_250_PLAT_1A.hex
MK1-250 with red RTDs (from 2013, 2014)	_FIL_250_RED_235A.hex
MK2-250	_FIL_250_PLAT_1A.hex
MK1-450	_FIL_450_45A.hex
Emulsion-Type Heads	Firmware
All Emulsion-type Heads (including mixing heads)	_TUBES_35K.hex
With COD or Clench Valve tied to Printing Moves Only	_TUBES_49V.hex
Laser Heads	Firmware
Diode Lasers on Repetrel v2.x	_LASER_R2_234.hex
Diode and CO2 Lasers on Repetrel v3.x	_LASER_R3_PWM_6L.hex
Spindle Tools	Firmware
Spindle Tools (1- and 3- Phase)	_DrillMill_2.3.hex
Inkjet Heads	Firmware
Inkjet Headss (Heat- and Piezo- based)	_INKJET_6E.hex

For the STM-429 and STM-407 Boards

Video instructions for flashing the 103 (HH/HB) Controllers: https://youtu.be/yM8QMZBTb4o

@@ Line 5: / Line 5: @@
 |}
+New software will often require new firmware. New software packages always come with the latest firmware at the time the software was released; however, sometimes newer firmware is available.
+There are two families of firmware; one for the heads, or STM-103 boards, and another for the motion controllers, or STM-427 / STM-407 boards.
+== Download ==
 '''Firmware''' [[File:Download_button.png|150px|link=http://hyrel3d.net/downloads/firmware/Firmware_2017.05.10.rar]]
 '''''<span style="color: red;">Versions 2.415 and 33/35, * with Spindle Tool firmware, as of 10 May 2017</span>'''''
-New software will often require new firmware. New software packages always come with the latest firmware at the time the software was released; however, sometimes newer firmware is available.
-There are two families of firmware; one for the heads, or STM-103 boards, and another for the motion controllers, or STM-427 / STM-407 boards.
 == Print Head / Hot Bed Firmware ==