Materials

A huge variety of materials can be printed with various extruders on the Hyrel machines. Below are the recipes we have so far...

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print; you can sort by any column:

Material Reference Chart

Material	Extruder	HotHead (°C)	Fan Speed	HotBed (°C)	Steps / nl	Verified?
ABS	MK1-250	240/235	35 (=89%)	80	0.78	yes
PLA	MK1-250	185/180	35 (=89%)	40	0.78	yes
PlastInk Rubber	MK1-250	225	35 (=89%)	50	0.78	yes
NinjaFlex	MK1-250	225	35 (=89%)	50	0.78	yes
Nylon	MK1-250	225	35 (=89%)	80	0.78	yes
T-Glase	MK1-250	225	35 (=89%)	80	0.78	yes
BendLay	MK1-250	225	35 (=89%)	50	0.78	no
LayBrick	MK1-250	225	35 (=89%)	80	0.78	no
LayWoo-d3	MK1-250	220/205	35 (=89%)	80	0.78	yes
PET	MK1-250	210	35 (=89%)	40	0.78	no
PVA	MK1-250	210	35 (=89%)	40	0.78	no
Clay	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Metal Clay, Precious Metal Clay	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Polypropylene	MK1-250	235	35 (=89%)	80	0.78	yes
Polycarbonate	MK1-350	350	35 (=89%)	80	0.78	yes
Porcelain	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Plasticine	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Plah-Doh	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Sculpey	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Sugru	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
RTV Silicone	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes