|
|
| Line 1: |
Line 1: |
| − | == Chart of Codes ==
| + | blah |
| − | | |
| − | | |
| − | {| border="1" class="wikitable"
| |
| − | |+ G- and M- Code Reference Chart
| |
| − | ! Code
| |
| − | ! Supported
| |
| − | ! Brief Description
| |
| − | |-
| |
| − | ! [[#G0_Rapid_Move|G0]]
| |
| − | | Yes || Rapid Move
| |
| − | |-
| |
| − | ! [[#G1_Working_Move|G1]]
| |
| − | | Yes || Working Move
| |
| − | |-
| |
| − | ! [[#G2_Clockwise_Arc|G2]]
| |
| − | | Yes || Clockwise Arc
| |
| − | |-
| |
| − | ! [[#G2.1_Spiral_CW_Arc1|G2.1]]
| |
| − | | Yes || Spiral CW Arc<sup>1</sup>
| |
| − | |-
| |
| − | ! [[#G2.2_Spiral_CW_Arc2|G2.2]]
| |
| − | | Yes || Spiral CW Arc<sup>2</sup>
| |
| − | |-
| |
| − | ! [[#G2.3_3-Space_CW_Arc|G2.3]]
| |
| − | | Yes || 3-Space CW Spiral Arc
| |
| − | |-
| |
| − | ! [[#G3_Counterclockwise_Arc|G3]]
| |
| − | | Yes || Counterclockwise Arc
| |
| − | |-
| |
| − | ! [[#G3.1_Spiral_CCW_Arc1</sup>|G3.1]]
| |
| − | | Yes || Spiral CCW Arc<sup>1</sup>
| |
| − | |-
| |
| − | ! [[#G3.2_Spiral_CCW_Arc2|G3.2]]
| |
| − | | Yes || Spiral CCW Arc<sup>2</sup>
| |
| − | |-
| |
| − | ! [[#G3.3_3-Space_CCW_Arc|G3.3]]
| |
| − | | Yes || 3-Space CCW Spiral Arc
| |
| − | |-
| |
| − | ! [[#G4_Timed_Pause|G4]]
| |
| − | | Yes || Timed Pause
| |
| − | |-
| |
| − | ! [[#G10_UNUSED|G10]]
| |
| − | | ''No'' || ''Absolute E''
| |
| − | |-
| |
| − | ! [[#G11_UNUSED|G11]]
| |
| − | | ''No'' || ''Relative E''
| |
| − | |-
| |
| − | ! [[#G16_Arc_Plane:_Any|G16]]
| |
| − | | Yes || Arc in Any Plane
| |
| − | |-
| |
| − | ! [[#G17_Arc_Plane:_XY|G17]]
| |
| − | | Yes || Arc in XY Plane
| |
| − | |-
| |
| − | ! [[#G18_Arc_Plane:_XZ|G18]]
| |
| − | | Yes || Arc in XZ Plane
| |
| − | |-
| |
| − | ! [[#G19_Arc_Plane:_YZ|G19]]
| |
| − | | Yes || Arc in YZ Plane
| |
| − | |-
| |
| − | ! [[#G20_Set_Units_to_Inches|G20]]
| |
| − | | Yes || Set Units to Inches
| |
| − | |-
| |
| − | ! [[#G21_Set_Units_to_Milimeters|G21]]
| |
| − | | Yes || Set Units to Milimeters
| |
| − | |-
| |
| − | ! [[#G28_Send_X,_Y_to_Physical_Home|G28]]
| |
| − | | Yes || Send X, Y to Physical Home
| |
| − | |-
| |
| − | ! [[#G53_Clear_Offsets|G53]]
| |
| − | | Yes || Clear Offsets
| |
| − | |-
| |
| − | ! [[#G54_-_G59_-_Set_Offsets|G54-59]]
| |
| − | | Yes || Set Offsets
| |
| − | |-
| |
| − | ! [[#G81_Peck_Drilling|G81]]
| |
| − | | G81 || Peck Drilling
| |
| − | |-
| |
| − | ! [[#G90_Absolute_Positioning|G90]]
| |
| − | | Yes || Absolute Positioning
| |
| − | |-
| |
| − | ! [[#G91_Relatative_Positioning|G91]]
| |
| − | | Yes || Relatative Positioning
| |
| − | |-
| |
| − | ! [[#G92_Reset_Coordinate_Offsets|G92]]
| |
| − | | Yes || Reset Coordinates
| |
| − | |-
| |
| − | ! [[#G93_Clear_Coordinate_Offsets|G93]]
| |
| − | | Yes || Reset Coordinates
| |
| − | |-
| |
| − | ! [[#M0_Stop_Until_Resume|M0]]
| |
| − | | Yes || Stop Until Resume
| |
| − | |-
| |
| − | ! [[#M3_Turn_On_Spindle_.28CW.29|M3]]
| |
| − | | Yes || Spindle On CW
| |
| − | |-
| |
| − | ! [[#M4_Turn_On_Spindle_.28CCW.29R|M4]]
| |
| − | | Yes || Spindle On CCW
| |
| − | |-
| |
| − | ! [[#M5_Turn_Off_Spindle|M5]]
| |
| − | | Yes || Spindle Off
| |
| − | |-
| |
| − | ! [[#M6_Declare_Head_Offsets|M6]]
| |
| − | | Yes || Declare Head Offsets
| |
| − | |-
| |
| − | ! [[#M7_Set_Power_On_Aux_1|M7]]
| |
| − | | Yes || Aux 1 On (Mist)
| |
| − | |-
| |
| − | ! [[#M8_Set_Power_On_Aux_2|M8]]
| |
| − | | Yes || Aux 2 On (Flood)
| |
| − | |-
| |
| − | ! [[#M9_Turn_Off_All_Aux|M9]]
| |
| − | | Yes || All Aux Off
| |
| − | |-
| |
| − | ! [[#M17_Engage_Motors|M17]]
| |
| − | | Yes || Engage Motors
| |
| − | |-
| |
| − | ! [[#M18_Disengage_Motors|M18]]
| |
| − | | Yes || Disengage Motors
| |
| − | |-
| |
| − | ! [[#M30_End_of_Program|M30]]
| |
| − | | Yes || End of Program
| |
| − | |-
| |
| − | ! [[#M82_Absolute_E-Values|M82]]
| |
| − | | Yes || Absolute E-Values
| |
| − | |-
| |
| − | ! [[#M83_Relative_E-Values|M83]]
| |
| − | | Yes || Relative E-Values
| |
| − | |-
| |
| − | ! [[#M84_Disable_Motors|M84]]
| |
| − | | Yes || Disable Motors
| |
| − | |-
| |
| − | ! [[#M104_Set_Temp_.28Head.29|M104]]
| |
| − | | Yes || Set Temp (Head)
| |
| − | |-
| |
| − | ! [[#M106_Set_Cooling_.2F_Etc.|M106]]
| |
| − | | Yes || Set Cooling / Etc.
| |
| − | |-
| |
| − | ! [[#M107_Stop_Cooling_.2F_Etc.|M107]]
| |
| − | | Yes || Stop Cooling / Etc.
| |
| − | |-
| |
| − | ! [[#M109_Wait_for_Temp_.28Head.29|M109]]
| |
| − | | Yes || Wait for Temp (Head)
| |
| − | |-
| |
| − | ! [[#M116_UNUSED|M116]]
| |
| − | | ''No'' || ''Pause for All Temps''
| |
| − | |-
| |
| − | ! [[#M140_Set_Temp_.28Bed.29|M140]]
| |
| − | | Yes || Set Temp (Bed)
| |
| − | |-
| |
| − | ! [[#M141_Set_Temp_.28Chamber.29|M141]]
| |
| − | | Yes || Set Temp (Chamber)
| |
| − | |-
| |
| − | ! [[#M190_Wait_for_Temp_.28Bed.29|M190]]
| |
| − | | Yes || Wait for Temp (Bed)
| |
| − | |-
| |
| − | ! [[#M191_Wait_for_Temp_.28Chamber.29|M191]]
| |
| − | | Yes || Wait for Temp (Chamber)
| |
| − | |-
| |
| − | ! [[#M203_Set_G0_Speed|M203]]
| |
| − | | Yes || Set G0 Speed
| |
| − | |-
| |
| − | ! [[#M221_Set_Flow_Rate|M221]]
| |
| − | | Yes || Set Flow Rate
| |
| − | |-
| |
| − | ! [[#M229_Use_E_Values|M229]]
| |
| − | | Yes || Use E Values
| |
| − | |-
| |
| − | ! [[#M253_Turn_On_Lathe_.28CW.29|M253]]
| |
| − | | Yes || Turn On Lathe (CW)
| |
| − | |-
| |
| − | ! [[#M254_Turn_On_Lathe_.28CCW.29|M254]]
| |
| − | | Yes || Turn On Lathe (CCW)
| |
| − | |-
| |
| − | ! [[#M255_Turn_Off_Lathe|M255]]
| |
| − | | Yes || Turn Off Lathe
| |
| − | |-
| |
| − | ! [[#M619_Map_Aux_Port|M619]]
| |
| − | | Yes || Map Aux Port
| |
| − | |-
| |
| − | ! [[#M620_Enable_Device|M620]]
| |
| − | | Yes || Enable Device
| |
| − | |-
| |
| − | ! [[#M621_Set_Laser_Power|M621]]
| |
| − | | Yes || Set Laser Power
| |
| − | |-
| |
| − | ! [[#M623_Duration_Emit|M623]]
| |
| − | | Yes || Duration Emit
| |
| − | |-
| |
| − | ! [[#M660_Assign_Tool_Height_Offset|M660]]
| |
| − | | Yes || Set Tool Offsets
| |
| − | |-
| |
| − | ! [[#M670_Enable_Y-arm_Light|M670]]
| |
| − | | Yes || Enable Y-arm Light
| |
| − | |-
| |
| − | ! [[#M671_Activate_Danger_Lights|M671]]
| |
| − | | Yes || Activate Danger Light
| |
| − | |-
| |
| − | ! [[#M672_Set_Y-arm_Light|M672]]
| |
| − | | Yes || Set Y-arm Light
| |
| − | |-
| |
| − | ! [[#M675_Activate_Response_LEDs|M675]]
| |
| − | | Yes || Activate Response LEDs
| |
| − | |-
| |
| − | ! [[#M676_Activate_Recirc._Fan|M676]]
| |
| − | | Yes || Activate Recirc. Fan
| |
| − | |-
| |
| − | ! [[#M677_Activate_Buzzer|M677]]
| |
| − | | Yes || Activate Buzzer
| |
| − | |-
| |
| − | ! [[#M678_Activate_Laser_X-hair|M678]]
| |
| − | | Yes || Activate Laser X-hair
| |
| − | |-
| |
| − | ! [[#M679_Activate_Vacuum|M679]]
| |
| − | | Yes || Activate Vacuum
| |
| − | |-
| |
| − | ! [[#M684_Activate_Exhaust|M684]]
| |
| − | | Yes || Activate Exhaust
| |
| − | |-
| |
| − | ! [[#M685_Set_Power_on_Air|M685]]
| |
| − | | Yes || Activate Air
| |
| − | |-
| |
| − | ! [[#M689_Activate_Ext._Head|M689]]
| |
| − | | Yes || Activate Ext. Head
| |
| − | |-
| |
| − | ! [[#M701_Set_Head_Reporting|M701]]
| |
| − | | Yes || Set Head Reporting
| |
| − | |-
| |
| − | ! [[#M702_-_M704_Cloning_Heads|M702]]
| |
| − | | Yes || Establish Clone Squad
| |
| − | |-
| |
| − | ! [[#M702_-_M704_Cloning_Heads|M703]]
| |
| − | | Yes || Add to Clone Squad
| |
| − | |-
| |
| − | ! [[#M702_-_M704_Cloning_Heads|M704]]
| |
| − | | Yes || Remove from Clone Squad
| |
| − | |-
| |
| − | ! [[#M718_Stop_Logging_to_File|M718]]
| |
| − | | Yes || Stop Logging to File
| |
| − | |-
| |
| − | ! [[#M719_Start_Logging_to_File|M719]]
| |
| − | | Yes || Start Logging to File
| |
| − | |-
| |
| − | ! [[#M721_Set_Unprime_Values|M721]]
| |
| − | | Yes || Set Unprime Values
| |
| − | |-
| |
| − | ! [[#M722_Set_Prime_Values|M722]]
| |
| − | | Yes || Set Prime Values
| |
| − | |-
| |
| − | ! [[#M723_Set_Manual_Flow|M723]]
| |
| − | | Yes || Set Manual Flow
| |
| − | |-
| |
| − | ! [[#M728_Set_Motor_Current_Boost|M728]]
| |
| − | | Yes || Set Motor Current Boost
| |
| − | |-
| |
| − | ! [[#M756_Set_Height_for_Flow|M756]]
| |
| − | | Yes || Set Height for Flow
| |
| − | |-
| |
| − | ! [[#M772_Reset_All_Metrics|M772]]
| |
| − | | Yes || Reset All Metrics
| |
| − | |-
| |
| − | ! [[#M773_Generate_Basic_Report|M773]]
| |
| − | | Yes || Generate Basic Report
| |
| − | |-
| |
| − | ! [[#M783_Tie_Aux_to_Extrusion|M783]]
| |
| − | | Yes || Tie Aux to Extrusion
| |
| − | |-
| |
| − | ! [[#M790_New_Layer_Actions|M790]]
| |
| − | | Yes || New Layer Actions
| |
| − | |-
| |
| − | ! [[#M791_Snap_Image|M791]]
| |
| − | | Yes || Snap Image
| |
| − | |-
| |
| − | ! [[#M792_Execute_Action|M792]]
| |
| − | | Yes || Execute Action
| |
| − | |-
| |
| − | |}
| |
| − | | |
| − | '''[[#What_is_GCode.3F|Back to top]]'''
| |
