2 Install

Here are instructions for uploading the latest Repetrel software and associated applications (EcoSystem Apps):

Repetrel & Firmware

1. Download http://www.hyrel3d.net/downloads/updater/repetrel-2.828.zip (as of 16 Nov 1015). This contains:
   1. Repetrel 2.828
   2. Motion Controller firmware 2.409
   3. PH/HB Controller firmware (see table to the right):
2. Extract the contents
3. Rename C:/repetrel to C:/repetrel.old (or similar)
4. Move your extracted repetrel directory to C:/repetrel

Current PrintHead and HotBed Controller Firmware Versions

Controller	Standard	Legacy
HotBed	hothead_232A.hex	hothead_jmpr_232J.hex
MK1-250	hothead_232A.hex	hothead_jmpr_232J.hex
Quiet Storm Tool	hothead_232A.hex	hothead_jmpr_232J.hex
Spindle Tool	hothead_232A.hex	n/a
Laser Tool	hothead_232A.hex	n/a
MK1-400	MK400.32A.hex	n/a
EMO-Type*	Emo_Vol_Kra_Cod.32A.hex	n/a
*Note that EMO-Type Heads include the following family of heads: EMO, COD, VOL, VCD, KRA, KCD, SDS, CSD
*Note also that EMO-Type Heads will work with hothead_232A.hex

Temp

Current PrintHead and HotBed Controller Firmware Versions

Controller	Standard		Legacy
	File Name	swVersion	File Name	swVersion
HotBed MK1-250 Quiet Storm	hothead_232A.hex	232A	hothead_jmpr_232J.hex	232J
Spindle Tool Laser Tool	hothead_232A.hex	232A	n/a	n/a
MK1-450	MK400.32A.hex	32A	n/a	n/a
EMO-Type*	Emo_Vol_Kra_Cod.32A.hex	32V	n/a	n/a
*Note that EMO-Type Heads include the following family of heads: EMO, COD, VOL, VCD, KRA, KCD, SDS, CSD
*Note also that EMO-Type Heads will work with hothead_232A.hex

Software upgrade complete. Occasionally a user will have to point existing shortcuts to the new executible, C:/repetrel/bin/repetrel.exe

Click here to watch a video of the software upgrade process.

Click here to watch a video of the 407 Motion Controller Firmware upgrade process.

Click here to watch a video of the 103 HotHead/HotBed Controller Firmware upgrade process.

EcoSystem Apps

1. Download http://www.hyrel3d.net/downloads/updater/EcosystemApps.exe - see table below for the list of programs and their proper locations.
2. Run the executable, with the location pointed to C:
3. Launch Repetrel, go to the Programs tab, and double click in each text field, pointing the applications to their respective executable files under C:/EcosystemApps. See table below, or screenshot with locations. Note that your Slic3r Recipes (or Slic3r CFG files) should still be under C:\Users\Hyrel\AppData\Roaming\Slic3r.

EcosystemApps Locations

Program Name	Executable Location
Slic3r EXE	C:\EcosystemApps\Slic3r\slic3r.exe
Slic3r CFG	C:\Users\Hyrel\AppData\Roaming\Slic3r
OpenSCAD	C:\EcosystemApps\OpenSCAD\openscad.exe
FreeCAD	C:\EcosystemApps\FreeCAD 0.15\vcredist_x86.exe
MeshLab	C:\EcosystemApps\VCG\MeshLab\meshlab_32.exe
FlatCAM	C:\EcosystemApps\FlatCAM\FlatCAM.exe
QCAD	C:\EcosystemApps\QCAD\qcad.exe
TeamViewer	C:\EcosystemApps\TeamViewer\Version9\TeamViewer.exe
InkScape	C:\EcosystemApps\inkscape\inkscape.exe
GIMP	C:\EcosystemApps\GIMP 2\bin\gimp-2.8.exe