Our Warranty Policy is contained within our Ordering Terms, Policies, and Conditions page. We are committed to providing the best customer service and support possible.
ENGINE HR
ENGINE HR - HIGH RESOLUTION
High Reliability - Low Maintenance - High Uptime - High Resolution
- Designed specifically with the needs of the Bioplotting / Bioprinting community in mind!
- The EHR printers work with all Hyrel print heads, allowing you to work with numerous materials, including store-bought or home-made filaments, clays, pastes, hydrogels, photo-initiators, and cementitious materials, but we recommend the 16A for materials printed at over 300 °C
- Designed with safety in mind
- Rugged, all-metal design
- Includes interchangeable mounting system
- Plug-and-play modular heads
- Ready for upgrade/expansion options
- Compatible with large volume extruders
- Please note that thermoplastics like ABS, PLA, Nylon, NinjaFlex, FilaFlex, etc. do much better with a heated enclosure.
- 1.25 micron (or better) resolution in all axes.
TECH SPECS
BUILD VOLUME
- X Axis 100 mm
- Y Axis 100 mm
- Z Axis 100 mm
POSITIONAL ACCURACY:
- X Axis +/- 12 microns
- Y Axis +/- 12 microns
- Z Axis +/- 10 microns
POSITIONAL RESOLUTION:
- X Axis 1.25 microns
- Y Axis 1.25 microns
- Z Axis 1 micron
CHASSIS:
- Powder-coated Steel & Anodized Aluminum (no enclosure)
MOTION CONTROL:
- Precision Ball Screw in Z-axis
- Precision Linear Bearing System in X, Y, and Z Axes
ELECTRONICS:
- State-of-the-art 150+ MHz 32-bit ARM processor
- Modular, micro-stepping motor-drivers with closed-loop encoding
- Integrated, Dual CAN-bus architecture
- “Smooth Move” motion control technology firmware
TABLET PC:
- USB: Four USB 2.0 Ports (External)
- WLAN: WiFi Capable
PHYSICAL DIMENSIONS
OUT OF THE BOX:
- Weight: 55 lbs / 25 kgs
- Width: 13 in / 33 cm
- Depth: 19 in / 48 cm
- Height: 20in / 51 cm
ATX POWER SUPPLY SPECS:
- Power: 750 W
- Voltage: 115 / 230 V
- Current: 16 / 8 A
- Frequency: 60 / 50 Hz
- Physical On/Off Switch: Yes
- IEC-60320 C14 connector
- IEC-60320 C13-to-NEMA 15 Power Cable
- US Standard (International must supply own)
COMPATIBLE HEADS
HOT FLOW HEADS:
- MK1-250
- MK2-250
- MK1-450
COLD / WARM FLOW HEADS:
- EMO-25, COD-25
- VOL-25, VCD-25
- KRA-15, KCD-15
SYRINGE HEADS:
- SDS-5, CSD-5
- SDS-10, CSD-10
- SDS-30, CSD-30
- SDS-60, CSD-60
OTHER HEADS:
- Spindle Tool
- Lasers
- Extra Cooling Fan
- Microscope
WHAT IS INCLUDED
- HYREL 3D Printer with power cord
- Seven USB ports for peripherals
- Four tool positions for print heads
- Tablet PC with Windows 10 and all software, firmware, and drivers installed and tested
- 100x100x100mm Build Area
