ENGINE SR

ENGINE SR - STANDARD RESOLUTION

High Reliability - Low Maintenance - High Uptime

  • The ESR printers work with all Hyrel print heads, allowing you to work with
    numerous materials, including store-bought or home-made filaments,
    clays, pastes, hydrogels, photo-initiators, and cementitious materials,
    but we recommend the 16A for materials printed at over 300 °C
  • Designed with safety in mind
  • Rugged, all-metal design
  • Includes interchangeable mounting system
  • Plug-and-play modular heads
  • Ready for upgrade/expansion options
  • Compatible with large volume extruders
  • Please note that thermoplastics like ABS, PLA, Nylon, NinjaFlex, FilaFlex, etc. do much better with a heated enclosure.
ENGINE SR - STANDARD RESOLUTION

TECH SPECS

BUILD VOLUME
  • X Axis 200 mm
  • Y Axis 200 mm
  • Z Axis 200 mm
POSITIONAL ACCURACY:
  • X Axis +/- 50 microns
  • Y Axis +/- 50 microns
  • Z Axis +/- 10 microns
POSITIONAL RESOLUTION:
  • X Axis 5 microns
  • Y Axis 5 microns
  • Z Axis 1 micron
 
CHASSIS:
  • Powder-coated Steel & Anodized Aluminum (no enclosure)

MOTION CONTROL:
  • Precision Ball Screw in X, Y, and Z axes
  • Precision Linear Bearing System in X, Y, and Z Axes
ELECTRONICS:
  • State-of-the-art 150+ MHz 32-bit ARM processor
  • Modular, micro-stepping motor-drivers with closed-loop encoding
  • Integrated, Dual CAN-bus architecture
  • “Smooth Move” motion control technology firmware
TABLET PC:
  • USB: Four USB 2.0 Ports (External)
  • WLAN: WiFi Capable

PHYSICAL DIMENSIONS

OUT OF THE BOX, SPOOL RODS ATTACHED
  • Weight: 50 lbs / 23 kgs
  • Width: 13 in / 33 cm
  • Depth: 21 in / 54 cm
  • Height: 22 in / 56 cm
OUT OF THE BOX, SPOOL RODS REMOVED
  • Weight: 50 lbs / 23 kgs
  • Width: 13 in / 33 cm
  • Depth: 15 in / 38 cm
  • Height: 22 in / 56 cm
ATX POWER SUPPLY SPECS:
  • Power: 750 W
  • Voltage: 115 / 230 V
  • Current: 16 / 8 A
  • Frequency: 60 / 50 Hz
  • Physical On/Off Switch: Yes
  • IEC-60320 C14 connector
  • IEC-60320 C13-to-NEMA 15 Power Cable
  • US Standard (International must supply own)

COMPATIBLE HEADS

HOT FLOW HEADS:
  • MK1-250 
  • MK2-250
  • MK1-450 
COLD / WARM FLOW HEADS:
  • EMO-25, COD-25
  • VOL-25, VCD-25
  • KRA-15, KCD-15
SYRINGE HEADS:
  • SDS-5, CSD-5
  • SDS-10, CSD-10
  • SDS-30, CSD-30
  • SDS-60, CSD-60
OTHER HEADS:
  • Spindle Tool
  • Lasers
  • Extra Cooling Fan
  • Microscope
 

WHAT IS INCLUDED

  • HYREL 3D Printer with power cord
  • Seven USB ports for peripherals
  • Four tool positions for print heads
  • Tablet PC with Windows 10 and all software, firmware, and drivers installed and tested
  • 225x200x200mm Build Area​

SERVICE & SUPPORT