High Reliability - Low Maintenance - High Uptime - Enclosure
Protect your builds from outside environmental changes
Enclosed build environment and filament storage
The 30M printers work with all Hyrel print heads, allowing you to work with numerous materials, including store-bought or home-made filaments, clays, pastes, hydrogels, photo-initiators, and cementitious materials, but we recommend the 16A for materials printed at over 300 °C
Designed with safety in mind
Rugged, all-metal design
Includes interchangeable mounting system
Plug-and-play modular heads
Ready for upgrade/expansion options
Compatible with large volume extruders
TECH SPECS
BUILD VOLUME
X Axis 225 mm
Y Axis 200 mm
Z Axis 200 mm
POSITIONAL ACCURACY:
X Axis +/- 50 microns
Y Axis +/- 50 microns
Z Axis +/- 10 microns
POSITIONAL RESOLUTION:
X Axis 5 microns
Y Axis 5 microns
Z Axis 1 micron
CHASSIS & ENCLOSURE:
Powder-coated Steel & Anodized Aluminum
Plastic Windows
MOTION CONTROL:
Precision Ball Screw in Z-axis
IKO Linear Bearing System in X, Y, and Z Axes
ELECTRONICS:
State-of-the-art 150+ MHz 32-bit ARM processor
Modular, micro-stepping motor-drivers
Integrated, Dual CAN-bus architecture
“Smooth Move” motion control technology firmware
TABLET PC:
USB: Four USB 2.0 Ports (External)
WLAN: WiFi Capable
PHYSICAL DIMENSIONS
OUT OF THE BOX, DOORS OPEN & LCD FULLY-EXTENDED
Weight: 50 lbs / 23 kgs
Width: 40 in / 97 cm
Depth: 16 in / 41 cm
Height: 31 in / 79 cm
OUT OF THE BOX, DOORS CLOSED & LCD FULLY RETRACTED
Weight: 50 lbs / 23 kgs
Width: 35 in / 89 cm
Depth: 16 in / 41 cm
Height: 31 in / 79 cm
ATX POWER SUPPLY SPECS:
Power: 750 W
Voltage: 115 / 230 V
Current: 16 / 8 A
Frequency: 60 / 50 Hz
Physical On/Off Switch: Yes
IEC-60320 C14 connector
IEC-60320 C13-to-NEMA 15 Power Cable
US Standard (International must supply own)
COMPATIBLE HEADS
HOT FLOW HEADS:
MK1-250
MK2-250
MK1-450
COLD / WARM FLOW HEADS:
EMO-25, COD-25
VOL-25, VCD-25
KRA-15, KCD-15
SYRINGE HEADS:
SDS-5, CSD-5
SDS-10, CSD-10
SDS-30, CSD-30
SDS-60, CSD-60
OTHER HEADS:
Spindle Tool
Lasers
Extra Cooling Fan
Microscope
WHAT IS INCLUDED
Enclosed HYREL 3D Printer with power cord
Seven USB ports for peripherals
Four tool positions for print heads
Tablet PC on swivel mount, with Windows 10 and all software, firmware, and drivers installed and tested
225x200x200mm Build Area
Chamber Lighting
Tool Tree holds up to five additional heads
Emergency Off (EMO) Button & Illuminated Control Panel
SERVICE & SUPPORT
Our Warranty Policy is contained within our Ordering Terms, Policies, and Conditions page. We are committed to providing the best customer service and support possible.