Modular Heads
Filament-Based Heads
FOR 1.75MM FILAMENTS AT UP TO 450°C
STANDARD
MK1-250 EXTRUDER
Standard Hot Flow For the most common 1.75mm filaments on the market with service temperatures up to 250°C. ABS, Nylons, PLA, PETT, etc.
VERY HOT
MK1-450 EXTRUDER
Very Hot Flow For Exotic 1.75mm filaments with service temperatures between 250-450°C. Polycarbonate, PEEK, Ultem, Carbon Fiber
FLEXIBLE
MK2-250
Flexible Hot Flow For Flexible 1.75mm filaments with service temperatures up to 250°C. BendLay, FilaFlex, NinjaFlex, etc.
Cold/Warm Flow Heads
FOR CLAYS, PASTES, RESINS, ADHESIVES AND HIGH VISCOSITY EMULSIFIABLES
CROSSLINKING OPTIONS
ALL OF OUR CLAY/EMULSION/LIQUID/RESIN-TYPE HEADS HAVE UV CROSSLINKING ON DEMAN (COD) OPTIONS, INCLUDING A COD UV LED ARRAY AROUND THE NOZZLE, AND THE NEWER UV LIGHT PEN IN 365, 405, AND 450NM.
Reservoir-Based Flow Heads
FOR LIQUIDS, GELS, BIOLOGICALS, AND OTHER LOW VISCOSITY EMULSIFIABLES
STANDARD
SDS-5 EXTRUDER
Sterile, Disposable - For low viscosity, room temperature materials with 5cc syringes. Liquids, Gels, Biologicals, etc.
STANDARD
SDS-10 EXTRUDER
Sterile, Disposable - For low viscosity, room temperature materials with 10cc syringes. Liquids, Gels, Biologicals, etc.
SPECIALITY
DSD EXTRUDER
Dual Dispensing - For two-part mixtures at a 1:1 flow rate. Two-part epoxies.
STANDARD
SDS-30 EXTRUDER
Sterile, Disposable - For low viscosity, room temperature materials with 30cc syringes. Liquids, Gels, Biologicals, etc.
STANDARD
SDS-60 EXTRUDER
Sterile, Disposable - For low viscosity, room temperature materials with 60cc syringes. Liquids, Gels, Biologicals, etc.
STANDARD
SMH-2 EXTRUDER
Static Mixing Head Assembly - For two-part mixtures at a variable, user-programmed flow rates, with static (fixed) blending baffles. These heads are in production and in use in the field today.
Specialty / Other
QUIET STORM COOLING FAN
Additional, Directed Cooling - Programmable cooling where you want it. Position, Program, Peace of Mind.
ST1 ROUTER
Engrave, Cut, Route - For simple operations only possible with a spindle tool. NOTE: you must supply your own fixturing. Paper, Wood, Metals (Drilling only), PCB (Routing), Acrylic
LA6-450 LASER
Engrave, Cut, Trace -0 Add a 6 watt laser at 450 nanometers. Cardboard, Foam, Paper, Acrylic, Metals (Engraving Only), PCB (Traces only).
INSPECTOR MICROSCOPE
Illuminated, 100x Magnification For close inspection of output from any heads. Position, Focus, Inspect